|
HOW TO INSTALL YOUR ZIPPEESHADE™
In order for you Zippee Shade to fit properly
you must follow these instructions
Step 1:
Once you have removed your ZippeeShade™ from it's carrying case, you may notice that the UV Resistant fabric is wrinkled.
Step 2:
We recommend that you take a standard steam iron, and set it to the lowest setting yet allowing the steam to work. First iron the ZippeeShade™ on the silver side, so that you will not damage the printed logo. Once you have smoothed out all the wrinkles, you can turn the ZippeeShade™ over, and begin ironing the black side.
Step 3:
Be sure to iron the loose fabric that surrounds the frame.
Step 4:
To install the ZippeeShade™, slide back the mesh screen covering you sunroof, and slide the (SOLID SIDE) of ZippeeShade between the glass and mesh screen. For the rear sunroof: the loose fabric should be facing towards the rear hatchback. For the front sunroof: the loose fabric should be facing towards the front windshield.
Step 5:
Take the suction cups and depress them against the glass above.
Step 6:
Take the loose fabric and tuck it into the edges of sunroof trim ring. It's that easy.
|
|
 |
”Gone With The Wind Guarantee“
Yes, you can drive with your front sunroof ”WIDE OPEN“ without having to remove your ZippeeShade, and we’ll guarantee it! Our ZippeeShade has been thoroughly tested and able to withstand freeway speeds up to 90 m.p.h. We encourage you to give it a try! If for some reason your ZippeeShade is ”Gone With The Wind“ we’ll give you replacement shade for FREE! (Disclaimer: Please drive your MINI within the legal posted speed limit. By offering this guarantee we are not encouraging speeding of any kind, so please drive safely.)
DIRECTIONS:
Our ZippeeShades have been wind tested up to 90 m.p.h. (in the wide open position) without any possibility of flying away. But you have to be aware that when opening and closing your sunroof while your car is moving, sudden gusts of wind may cause the loose fabric to get stuck in the sliding track of the sunroof. We highly recommend that you only open and close your sunroof while your MINI is not moving.
Before you open your sunroof we highly recommend that you first check all (3) suction cups are securely held in place to the glass. Next visually see that the ZippeeShade is sitting center of your sunroof. Open the sunroof while the car is parked and you are ready to roll....
If you practice this procedure regularly, your ZippeeShade will never need to be removed prior to opening your sunroof.
| |
 |
 | |  |
|
| 
